Chimney repair in Dublin

Chimney repair in Dublin typically costs €400 to €1,800 to renew Code 4 lead step and apron flashing, €300 to €1,500 to rake out and repoint weathered brickwork and flaunching, €100 to €350 for a vented cowl and €1,500 to €4,500 for a full stack rebuild.

Lead step and apron flashing, repointing, flaunching, ventilated cowls and safe stack rebuilds across Dublin.

Free and no obligation. Your request goes to one Dublin roofer, not a list.

  • €400–€1,800Code 4 lead flashing renewal
  • €300–€1,500stack repointing and flaunching
  • €100–€350rain and bird cowl fitted
  • €1,500–€4,500full stack rebuild
Rendered chimney stack with clay pots, cowls and lead flashing on a slate roof

Why Dublin chimney breasts turn damp upstairs

Chimney stacks take more exposure than any other masonry on a house. On inter-war and Victorian terraces across Rathmines, Drumcondra, Clontarf and Dún Laoghaire, a brown damp mark on an upstairs chimney breast usually comes from one of four distinct faults, and diagnosing the right one saves wasted money.

Failed lead flashing

How to spot it
Water streaks right where stack meets slates; loose or split apron and back gutter
Proper Dublin repair
Rake joints 25 mm, dress new Code 4 lead step/apron and Code 5 back gutter with lead wedges
Typical guide
€400 to €1,800

Perished mortar and flaunching

How to spot it
Cracked cement crown around pots, loose bricks, sandy open joints
Proper Dublin repair
Rake out decayed joints, repoint (lime mortar on period brick) and renew sloped flaunching
Typical guide
€300 to €1,500

Open unused flue (no cap)

How to spot it
Rain drops straight down the open pot; musty soot smell inside closed fireplace
Proper Dublin repair
Fit a ventilated terracotta or stainless rain cowl so air still circulates without rain entry
Typical guide
€100 to €350

Leaning or spalling stack

How to spot it
Cracked render, frost-blown bricks or bulging masonry above roofline
Proper Dublin repair
Scaffold, dismantle unstable courses and rebuild stack to match existing profile
Typical guide
€1,500 to €4,500

Price your Dublin roof repair

Three taps and our Dublin guide price appears as you go. Your name and number come last, only if you want one roofer to ring you.

Chimney or lead flashing repair on a semi-detached house (needed this week) in Dublin: €500 to €1,800 typical Dublin guide range.

Step 1 of 4

What is wrong with the roof?

Pick the closest match. The roofer checks the rest on site.

How the Dublin guide price is worked out

Ranges reflect typical Dublin labour and materials for each fault and house type. Small slate, tile, flat-roof and flashing repairs are normally reached by ladder or tower. Full chimney rebuilds, three-storey period terraces and whole re-roofs can add scaffolding (€1,200 to €2,500). It is a planning guide, not a firm quote: one Dublin roofer inspects the roof and confirms the written figure before any work begins.

Shared party-wall chimneys on terraced and semi-detached houses

Most Dublin semi-detached and terraced homes share a single brick or rendered stack straddling the party wall. Water entering through a cracked mortar joint or perished lead back gutter on your neighbour's half of the stack frequently emerges on your upstairs bedroom wall. When inspecting a shared stack, ask the roofer to photograph all four faces and the crown so both households can see whether a joint repair makes sense and splits scaffold cost.

Never seal an unused chimney completely airtight at both top and bottom. An unvented flue traps hygroscopic flue salts and damp air, leaving brown stains bleeding through fresh paint even when the leadwork outside is bone dry. Keep a small air vent at fireplace level and a ventilated cowl on the pot.

Period red-brick stacks and lime mortar

On pre-1920 Dublin red-brick chimneys in Dublin 4, 6, 7 and 8, avoid hard sand-and-cement pointing over soft historic clay brick. Hard cement traps moisture inside the bricks so frost pops their faces off. Natural hydraulic lime mortar (NHL 3.5) lets the stack breathe and flex cleanly without spalling the brickwork.

See also: lead flashing and valleys and protected structures in Dublin.

Questions homeowners ask

How much does chimney flashing repair cost in Dublin?

Replacing step, apron and back-gutter lead flashing in Code 4/5 milled lead typically costs €400 to €1,800, excluding full scaffolding if the stack sits on a tall three-storey terrace.

Why is my upstairs chimney breast still damp after flashing was repaired?

Three common reasons: rain dropping down an uncapped open pot, hygroscopic soot salts drawing indoor humidity through old plaster on a sealed-off fireplace, or hairline cracks in pebble-dash render on the stack face.

Should I cap off an unused chimney completely?

Never seal a flue solid. Fit a ventilated cap or cowl on top and keep a discrete vent grille inside the room so air moves gently through the flue and keeps masonry dry.

Do I need scaffolding to repair a chimney in Dublin?

Low accessible stacks on two-storey semis can sometimes be worked off roof ladders or a scaffold tower. Tall stacks, three-storey period houses or brick rebuilds require safe chimney scaffolding.

Everything on this site

Edge of a pitched residential roof and eaves against an overcast sky

See your Dublin guide price before anyone rings

Three quick taps: what is wrong, what kind of house and how soon you need a roofer. When you want a written price, it goes to a single Dublin roofer.